Rental of process cooling solution for new build projects in the plastics industry

Neem contact op!
/ projects / rental-of-process-cooling-solution-for-new-build-projects-in-the-plastics-industry
Rental room cooling for the plastics industry

The temperature in large production spaces can rise considerably if machines are operated almost permanently. The permanent climate control system will undoubtedly operate effectively in normal outdoor temperatures. The question is whether during the construction process account should already be taken of the potential future expansion of the machine fleet. To limit investments, the most extensive cooling installation is generally not selected. As a consequence, the permanent installation in a new-build or conversion phase is not always sufficient for the peak temperatures or when systems have to be run continuously, at full power. Naber Plastics had already predicted this bottleneck, and called Coolworld in on time, to provide a temporary cooling solution. 

Location 
Naber Plastics, injection moulding company for plastics in Waalwijk, the Netherlands.

Needs & Challenge 
Temporary cooling of production spaces during new build.

Solution
1 chiller 170 kW.

Advantages
New-build project could be continued unhindered by the shortage of cooling capacity. Reliable solution, 24/7 service.

Pictures

Contact

If you have an emergency or are unsure of what specific temperature control you require, please call us. A local specialized engineer will be able to assist you with your decision-making. Or use the form below and we will get back to you as soon as possible:

Send